ANTIFECT

ANTIFECT N Liquid

Product features

antifect N liquid, 500 ml
Alcoholic rapid disinfection of non-invasive medical devices and surfaces.

Use biocidal products with caution. Always read the label and product information before use.

Product description

The product is suitable for disinfecting medical devices and surfaces. The rapid disinfection product is suitable for disinfecting surfaces close to patients with an increased risk of infection and the requirement for short contact times.

Our plus:

• very broad spectrum of efficacy within a very short time
• leaves no streaks
• ready to use

Microbiological efficacy:

• bactericidal according to VAH guidelines with shortened contact times, ready to use, contact time 1 min.
• bactericidal EN13727, EN16615 - high contamination, ready to use, contact time 1 min.
• tuberculocidal EN14348 - high contamination, ready to use, contact time 1 min.
• levurocidal according to VAH guidelines with shortened contact times, ready to use, contact time 1 min.
• levurocidal EN13624, EN16615 - high contamination, ready to use, contact time 1 min.
• limited virucidal EN14476 - high contamination, ready to use, contact time 30 sec.
• limited virucidal PLUS EN14476 - high contamination, ready to use, contact time 30 sec.
• Polyoma SV40 according to DVV, ready to use, contact time 5 min.

Application instructions

Apply undiluted to the surface, wipe and leave to act. Ensure complete wetting and keep the surface moist during the entire contact time. Ensure that all visible contamination is removed before disinfection. Application maximum 50 ml/m². Intended for use by professionals only. Serious incidents related to the product must be reported to the manufacturer and the competent authority. Not suitable for final disinfection of semi-critical and critical medical devices!

Special instructions

Use disinfectants with caution. Always read the label and product information before use. The product is well tolerated by metals and plastics (except acrylic glass and alcohol-sensitive paints). Particularly alcohol-sensitive surfaces, such as acrylic glass, must not be treated. Please observe the fire & explosion protection when using alcoholic disinfectants in the BR regulation "Disinfection work in the health care system". Keep away from heat and sources of ignition. Wearing protective gloves is recommended. Further information is available on request. The shelf life of the opened container can be found on the packaging.

BAuA-No.: N-16639, N-16641

Manufacturer

Schülke & Mayr GmbH
Robert-Koch-Str. 2
22851 Norderstedt
Germany
Phone +49 40 - 52100 - 0
Fax +49 40 - 52100 - 318
www.schuelke.com
info@schuelke.com

This information was last revised in January 2021.

Composition

100 g solution contains the following active ingredients: 24.75 g ethanol (94%), 35 g propan-1-ol.

Source: www.schuelke.com and information from the package insert
Status: 09/2024